 |
CW Series
CW Series 1/2-wave dipole antennas deliver outstanding performance and wide bandwidth in a rugged and cosmetically attractive package. These antennas feature a standard SMA or FCC Part 15 compliant RP-SMA connector. The CW series is also available as a monopole in 418MHz, 433.92MHz, 868MHz,and 916MHz versions.
|
|
|
|
 |
PW Series
Designed for permanent attachment, PW Series 1/2-wave whips give outstanding performance in a rugged and cost-effective package.The antennas internal counterpoise eliminates dependence on external ground plane. The antenna is attached by placing its base through a 1/4" hole in the product and securing it with a nut or by threading it into a PEM-style insert. This method of attachment is highly secure and saves the cost of an antenna connector. The antenna is fed through the base with RG-174 coax cable, which may be soldered directly to the board or attached using a 50-ohm connector. Standard cable length is 8.5". Custom lengths and terminations are available by special order. The PW series is also available as a monopole in 418MHz, 433.92MHz, 868MHz, and 916MHz versions.
|
|
|
|
 |
PML Series
Designed for permanent attachment, the PML Series features an internal, center-fed 1/2-wave element, eliminating the need for a ground plane, and an articulating joint which enables the antenna to tilt 180 degrees. The antenna mounts through a 1/4" hole in the product and is secured with a nut or PEM-style insert.
|
|
|
|
 |
HW Series
HW Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. The 315, 418, and 433MHz monopole versions have a 1/4-wave element. The 868 and 916MHz dipole versions have a center-fed 1/2-wave element with an internal ground reference. The antennas attach via a standard SMA or Part 15 compliant RP-SMA connector.
|
|
|
|
 |
HWR Series
HWR Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. The articulating base allows the antenna to tilt 90 degrees and rotate 360 degrees. The 315, 418, and 433MHz versions have a 1/4-wave element. The 868MHz, 916MHz, and 1.4GHz versions have a center-fed 1/2-wave element with an internal ground reference.
|
|
|
|
 |
RCT Series
The RCT 1/2-wave antenna delivers outstanding performance with an innovative articulating base that allows it to tilt and rotate for optimum orientation. The antenna's internal counterpoise eliminates external ground plane dependence and maximizes performance. The RCT attaches via a standard SMA or Part 15 compliant RP-SMA connector.
|
|
|
|
 |
CT Series
This stylish 1/2-wave omni-directional antenna features an internal counterpoise which eliminates external ground plane dependence and maximizes performance. A wide bandwidth and low VSWR make the CT antenna an excellent choice for any application requiring an affordable, cosmetically attractive, dipole antenna. The antenna attaches via a standard SMA or Part 15 compliant RP-SMA connector.
|
|
|
|
 |
RCL Series
The RCL Series is useful in products where additional height above the product's case is needed or a slightly wider operational bandwidth is desired. The 2.45GHz version has a center-fed 1/2-wave element with an internal ground reference. The 916MHz version has a 1/4-wave element. The antennas attach via a Part 15 compliant RP-SMA connector.
|
|
|
|
 |
RAF Series
The RAF is a compact, cosmetically attractive, dual-band, 1/2-wave antenna covering the popular 2.45GHz and emerging 5GHz bands. The antenna features a tilt and swivel joint which allows it to be oriented at straight or right angles to the product or conveniently folded for storage and shipment. It attaches using an SMA or FCC Part 15 compliant RP-SMA connector.
|
|
|
|
 |
WRT Series
The WRT Series antenna is ideally suited for applications such as wireless vending, security, traffic, or power equipment which require an unobtrusive, tamper-resistant antenna solution. The tiny 19 x 11mm radome installs through a small hole on the product and is anchored by a threaded base.
|
|
|
|
 |
MHW Series
MHW Series dipole antennas feature a durable, unobtrusive housing that sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antennas are well suited to low-power devices, but are capable of operation at levels to 10 watts.
|
|
|
|
 |
HDP Series
The HDP Series is a compact, center-fed antenna that achieves efficient operation at either or both of two frequency bands. Its durable, unobtrusive housing attaches permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc.
|
|
|
|
 |
VDP Series
The VDP Series is a compact, center-fed antenna achieves efficient operation at any or all of three frequency bands. Its durable, unobtrusive housing attaches permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc.
|
|
|
|
 |
"Ant Skins" Antenna Covers
These inexpensive sleeves cover a low-cost internal element of a user's choosing (i.e., a wire, rod, or flexible shaft). They provide the ruggedness and cosmetic appeal of expensive whip antennas at a fraction of the cost and are designed to allow a wide range of mounting options.
|
|
|
|
Embeddable Antennas
CW Series
